Description: 3D Printed AtGames Legends Trackball Supports - Sheldon Sims Shims Keep your trackball from breaking in the first place. I designed the trackball shims to fill in the gaps between the roller holders and sides of the trackball case. This stops downward pressure on the trackball from breaking the roller holders.The shims will work on the following: V1.0 AtGames Legends Ultimate, V1.1 AtGames Legends Ultimate, V1.2 AtGames Legends Ultimate, AtGames Legends Gamer Pro, Arcade Control Panel for AtGames Legends Pinball, QuadPlay 4-Player Control Panel (with optional trackball). Colors will vary, and will be based on whatever filament I have on hand. You can download the PDF installation guidefrom https://drive.google.com/file/d/1qhvGFW7nlu4vuSkNetJGg_GQcI9SKhbo/view?usp=drivesdk The installation guide is based on the Sam's version V1.0 AtGames Legends Ultimate, but the steps are similar for all AtGames Legends products which use the same trackball. *** Bottom of trackball case is pictured, but not included. You will be receiving 5 trackball supports which can be installed in your trackball case. *** *** Be sure to push all 5 shims down as far as they will go. Support #5 (the "U-shaped piece) can be a tight fit. *** Your fellow Legend, Sheldon Sims
Price: 6 USD
Location: Port Arthur, Texas
End Time: 2024-12-01T00:27:19.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: AtGames
Platform: Multi-Platform
Color: Yellow
Model: Not Applicable
Country/Region of Manufacture: United States
