Adafruit HUZZAH32, ESP32 Breakout Board, WLAN, Wifi, Bluetooth, Ble, Arduino

Description: Adafruit HUZZAH32, ESP32 Breakout Board, WLAN, Wifi, Bluetooth, Ble, ArduinoThe description of this item has been automatically translated. If you have any questions, please feel free to contact us. Paradisetronic.com Your Store for DIY Electronics Adafruit HUZZAH32, ESP32 breakout boardThe Adafruit HUZZAH32 Breakout Board is the smaller version of the Feather HUZZAH32. In contrast to the Feather Board, the LiPo charging circuit and the USB controller have been left out. This means that you need a USB adapter with a serial interface for programming, such as the CP2102 adapter or that UART converter cable.The Adafruit HUZZAH32 board has an Espressif ESP32 microcontroller with integrated WLAN and support for Bluetooth Classic and Bluetooth Low Energy (BLE) - ideal for IoT applications! The processor is operated with 3.3 V and clocked at 240 MHz. The chip has 4 KB of flash memory and a complete WLAN stack.The ESP32 microcontroller is the perfect upgrade to the ESP3266: It has significantly more inputs and outputs, more analog inputs, two analog outputs, additional peripherals, such as an additional UART and a dual-core processor with a much higher clock rate. With the second core, your own program no longer has to share the computing power with the integrated WiFi manager.The board is fully assembled, tested and delivered preprogrammed. The ESP32 SPI WiFi coprocessor firmware enables programming with CircuitPython: https://github.com/ladyada/Adafruit_CircuitPython_ESP32SPIESP32 specifications: https://espressif.com/en/products/hardware/esp32/overview240 MHz dual-core Tensilica LX6 microcontroller with 600 DMIPSIntegrated 520 KB SRAMIntegrated 802.11b / g / n HT40 Wi-Fi transceiver, baseband, stack and LWIPIntegrated dual mode Bluetooth (classic and BLE)4 MB flash memory inside the WROOM32 moduleOn-board circuit board antennaSmall signal amplifierHall sensor10x capacitive touch interface32 kHz oscillator3 x UARTs (only two are supported by default in the Arduino IDE, one UART is used for bootloading / debugging)3 x SPI (only one interface is supported by default in the Arduino IDE)2 x I2C (only one interface is supported by default in the Arduino IDE)12 x analog inputs (ADC)2 x I2S audio2 x analog outputs (DAC)PWM / timer inputs and outputs on each GPIO pinOpenOCD debug interface with 32 kB TRAX bufferSDIO master / slave 50 MHzSD card support The Adafruit HUZZAH32 Breakout Board is the smaller version of the Feather HUZZAH32. In contrast to the Feather Board, the LiPo charging circuit and the USB controller have been left out. This means that you need a USB adapter with a serial interface for programming, such as the CP2102 adapter or that UART converter cable. The Adafruit HUZZAH32 board has an Espressif ESP32 microcontroller with integrated WLAN and support for Bluetooth Classic and Bluetooth Low Energy (BLE) - ideal for IoT applications! The processor is operated with 3.3 V and clocked at 240 MHz. The chip has 4 KB of flash memory and a complete WLAN stack. The ESP32 microcontroller is the perfect upgrade to the ESP3266: It has significantly more inputs and outputs, more analog inputs, two analog outputs, additional peripher Marke Adafruit EAN Nicht zutreffend Modell Adafruit HUZZAH32 – ESP32 Breakout Board Herstellernummer 4172 Herstellungsland und -region Vereinigte Staaten Produktart Breakout Board

Price: 23.66 USD

Location: Berlin

End Time: 2024-02-20T19:59:43.000Z

Shipping Cost: 7.52 USD