Carbon Creations Z33 GT1 Hood Vents - 3 Piece for 350Z Nissan 03-06 ed

Description: About Store Contact Shipping Feedback Carbon Creations Z33 GT1 Hood Vents - 3 Piece for 350Z Nissan 03-06 ed_119812 Description / Notes: Part #: ed_119812 Make: Nissan Model: 350Z Material: Carbon Fiber Condition: New Product Notes : Carbon Creations Z33 GT1 Hood Vents - 3 Piece for 350Z Nissan 03-06 ed_119812 Description : 2003-2006 Nissan 350Z Z33 Carbon Creations GT1 Hood Vents - 3 Piece2x2 twill weave carbon fiberPremium gloss, UV protectant finishModified AerodynamicsTrack-proven strength and performanceUp to 70% lighter than OEM factory partsWeather-resistant aluminum mesh grille (where applicable)1 year limited warrantyModified Aerodynamics New: A brand-new, unused, unopened, item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in our retail store. To be installed professionally by a bodyshop with a valid automotive repair business license. Carbon fiber parts are reinforced with a fiberglass backing for added strength. Carbon fiber parts still require prep work. You will need to preform taks such as: buffing, drilling holes (for winshield windshield water nozzles, etc), adding or removing fiberglass (mounting tabs, etc). Ships direct from the manufacturer or a distributor. Manufactured with a marine gelcoat variant to help prolong the life against UV aging effects. Carbon is a composite material and may exhibit more gap than OEM materials. Hoods require hood pins. We do not offer any guarantee of fitment on vehicles that have been in involved in accidents and/or have body damage or customization. Disclaimer All hoods and hood accessories offered by Carbon Creations are designed as aftermarket accessories intended exclusively for off-road and show use. Carbon Creations assumes no responsibility for any damage or injury resulting from the use of these products. Carbon Creations hoods are often lighter than stock hoods and may feature vented designs, which can cause additional aerodynamic lift at high speeds. As a result, hood pins or AeroCatch latches are mandatory to ensure safety, as standard hood latches may not provide sufficient security. Due to the nature of carbon fiber reinforced with fiberglass and the manufacturing processes involved, Carbon Creations hoods are not “direct bolt-on” parts and often require significant preparation, such as sanding, cutting, shaving, and filling gaps. Additional fiberglass reinforcement may be necessary in some areas. Drilling holes for mounting, custom fitting adjustments, and modifications like drilling holes for windshield washer nozzles and tubing using a rotary tool may be required. It's important to note that not all original components, such as washer nozzles and tubing, may be transferable to the Carbon Creations hood depending on its design, so modifications or replacements may be needed. Hood Latch Adjustments Carbon Creations hoods typically require repositioning the hood latch to ensure proper alignment and closure. This involves carefully adjusting the latch, making small tweaks to move it up/down or forward/back until the striker catches securely. Given that carbon fiber hoods may have slight variations or warping, additional fitting, such as enlarging mounting holes or using shims, is often required for proper alignment. Adjustments to or removal of hood bump stops may also be necessary for proper fitment. Hood Accessories: Scoops and Other Modifications Carbon Creations also offers various hood accessories, including scoops, which can enhance the performance and appearance of your vehicle. Attaching a hood scoop typically requires drilling holes in the hood for mounting, as well as using bolts or adhesive, depending on the style of the scoop. When installing hood scoops on carbon fiber hoods, it may be necessary to add fiberglass reinforcement around the mounting area to ensure the scoop is securely fastened and properly aligned. Careful measurement and fitting are essential to prevent leaks and to maintain the structural integrity of the hood. For optimal results, Carbon Creations strongly recommends professional installation by a custom shop experienced in handling carbon fiber components and hood accessories, as traditional auto repair shops may lack the necessary expertise for these modifications. Safety and Legal Use Carbon Creations hoods, hood accessories, and other products are strictly designed for off-road and show use. Due to stringent Department of Transportation (DOT) regulations, many of these products, including hoods and hood scoops, are not street legal. Carbon Creations does not endorse or recommend using these products on public roads or highways. Disclaimer: This product is intended for off-road and show use only. Installation should be performed by qualified professionals, and all safety precautions must be followed. Vehicles depicted are highly modified for show which may include molding or adding to the original piece. Parts such as lights, splitters, canards, paint, wings, and others accessories are not included unless specified in the product description. Pictures are meant to show the style of the item(s) in the listing and in some cases may not necessarily show the exact year/make/model of the vehicle listed in the title and description. Will it fit my vehicle? Pay close attention to the make, model and year, but also the trim level. The eBay parts finder may be inaccurate, go by our listing title and description. Verify with us if you are unsure US Customers PayPal is accepted Visa Master Discover also accepted International Customers Please contact us before purchasing Payment types vary Our goal is to earn 5 star rating with every purchase! Tell us how we can make your exerience a 5-star one! All Copyright © Tilbury Enterprises LLC

Price: 395 USD

Location: Fullerton, California

End Time: 2025-01-06T04:35:25.000Z

Shipping Cost: 0 USD