Description: This is a Vintage style 50's wiring, Premium ES-335 Pre-Wired Harness for Gibsons, it also fits most Epiphones and 335 style Imports. This is a great upgrade for any ES-335, Epi Dot or 335 import guitar and is pre-built with all top of the line components. SPECS: All the components used in this harness are all top quality with tight tolerances. CTS Pots:- Are 550k with a 5% tolerance. These custom pots have long life wipers and a very smooth wide sweep, they do not drop off like standard CTS pots. Switchcraft 3-way toggle switch:- Short frame with long thread for through body applications. The go to switch for most high-end guitars because they are the best. Pure Tone Jack:- The patented Pure Tone jack contains dual tension grounds and dual positive tips for optimal signal and lowest possible noise. 100% greater surface area at all contact points creates a more stable connection; as a result, high and low frequencies are greatly improved creating a much more balanced sound while eliminating frequency spikes. No more noise crackle caused by pressure grounds! Gavitt Braided Wire:- Our improved version of braided shield wire, similar to the type used by Gibson® guitars, but pre-tinned for ease of use. #22 AWG 7/30 with tinned overcoat (pre-tinned). Braided with a layer of white Celanese followed by a layer of black cotton and finally waxed and braided overall with #36 AWG (3 end) tinned copper. All our other single cloth covered wire is also manufactured by Gavitt. Orange Drop Capacitors:- These are the more expensive 715 series. 200v/0.022uf. NOTE 1: 335’s can have slight variations in layout, so please check the layout (Last image) and compare the measurements. We do give you a little wiggle room, but it’s not a lot. If your spacing is larger or different than the measurements on our image above, there is a good chance that it won't fit. For shipping purposes, the wiring harness is mounted to a brown card assembly template and is the correct alignment for your Gibson ES-335. Note 2: If you are using this wiring harness for an EPIPHONE or imported 335 GUITAR, you will most likely have to open out your pot holes to 3/8" (10mm), as imported guitars with metric pots use a smaller 8mm hole. You will also need USA spec. guitar knobs with 24 spline. Metric knobs will not fit. They are a slightly smaller diameter and 18 spline. If you try to force metric knobs onto USA spec pots, you will break the pot. This a pre-wired kit. The pots, caps, jack, and 3-way toggle are pre-soldered for you (vintage 50's style). All that you need to do, is solder your pickups, and bridge ground wire and that’s it. After shipping, I will send you a link to my online wiring diagrams. I build these harnesses to order; bench tested on a test guitar in my workshop. I guarantee it working 100% when shipping. Usually, I ship within 72 hours. PLEASE NOTE:- If you are not comfortable or experienced with the installation of this style harness into a semi hollow or hollow body, we highly recommend taking it to an experienced guitar technician. If you have questions, please contact me.
Price: 119.95 USD
Location: Raleigh, North Carolina
End Time: 2024-09-01T17:04:37.000Z
Shipping Cost: 5.95 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
MPN: 335WH-PREM-OD022
Country/Region of Manufacture: United States
To Fit: Gibson-Epiphone- Import ES-335
Brand: Atlantc Custom Guitars
Type: Wiring Harness
