Description: HSS Auto-Split Most Strats use a middle pickup that is reverse-wound and reverse-polarity (RWRP) so that you get hum-canceling in positions 2 and 4. Add a humbucker into the bridge, and it's important that you split the humbucker in the 2 position, so that you combine only one of its coils with the middle pickup. This allows you to retain hum-canceling in this position, and it also most-closely approximates the tone of a Strat in the 2 position. You could add a switch of some type that would allow you to manually split the humbucker, but this would mean manipulating two switches. Most players prefer to let the 5-way switch perform this function automatically, so that position 1 is always the bridge humbucker, while position 2 is always the split humbucker combined with the middle. What about pot values? Humbuckers are voiced with 500kΩ pots (the traditional Gibson value), while Strat pickups are voiced with 250kΩ pots (the traditional Fender value). A 500k volume pot will make the guitar a little brighter, so it's great with the humbucker, but can make the single coils a little over-bright. Conversely, a 250k pot can make the humbucker a little too dark or "wooly". With our HSS assemblies you don't have to compromise. We use a 500k volume pot so that the humbucker sounds right in position 1, but we add a resistor into the circuit in the other 4 positions, dropping the load to 250k, so that the other positions sound right. Hey, who wants to compromise where tone is concerned? Finally, to make this wiring truly custom, we've used our ToneShaper narrow superswitch rather than the standard 5-way, so that we can customize the tone controls. The standard Strat switch assigns the tone controls to specific pickups, but the superswitch assigns them to specific switch positions, which allows for more granular control. We've assigned the lower tone control to position 1 only, and we've used Gibson-esque values for both the pot and the tone capacitor. This optimizes the tone controls for their respective positions: Gibson values for the "Gibson" position (position 1), and Fender values for the "Fender" positions (2/3/4/5). This kit includes everything you need to wire an HSS Stratocaster with auto-split humbucker (refer to the images above for a switching diagram). This is our most popular wiring scheme for HSS Strats. It includes the finest components, from the same suppliers that the large U.S. guitar companies have used for decades: (1) Capacitor, .022µF Orange Drop (1) Capacitor, .047µF Orange Drop (1) Jack, Switchcraft 1/4" Mono (1) Pot, CTS 250k Audio (1/4" Bushing Length) (2) Pot, CTS 500k Audio (1/4" Bushing Length) (1) Resistor, 470k (1) Screw for Shielding Ground Lug (1) Shielding Ground Lug (1) Switch, 5-Way, Oak-Grigsby, 4-Pole Superswitch (1) Treble Bleed Kit for Single-Coils 3' Wire, 22 AWG Cotton Push Back w/ Tinned Overcoat, Black 3' Wire, 22 AWG Cotton Push Back w/ Tinned Overcoat, White 3' Wire, 22 AWG Stranded Silver-Plated Copper, Black PTFE 3' Wire, 22 AWG Stranded Silver-Plated Copper, White PTFE Professional, Fully-Illustrated Wiring Diagram
Price: 48.99 USD
Location: Vero Beach, Florida
End Time: 2025-01-11T21:48:50.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: ToneShaper
Type: N/A
