Description: Upgraded Watt Power Meter Plug Home Electrical Usage Monitor Consumption, Energy Voltage Amps Kill Tester with Backlight, Overload Protection, 7 Modes Display 【Various Monitoring Parameters】: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time.【Upgraded LCD display】: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers.【Adjustable Backlight Time】: Our upgraded watt meter has 5 options of backlight time. The default backlight time duration is 10 minutes(bL-0). If you want to change the backlight time, you can press and hold "UP" and "DOWN" button at the same time to enter backlight time setting, then press "UP" and "DOWN" to select the backlight time (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on), finally press the "COST" to save the backlight time settings.【Overload protection】: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting.【Data Memory Function】: The wattage meter will record your power consumption data when you remove it from socket, or remove appliances from the electricity monitor. You can directly see the last data when you use it next time. This function can also automatically save the data when there is a sudden power failure.【100% SATISFACTION】: Our watt meter power analyzer is ideal for monitoring the electricity usage of your home appliances, controlling your power consumption, and saving your money. Your best choice for voltage meter, kilowatt meter, current meter and electricity meter. If you have any concerns with the electrical meter socket you received, you can contact us to get 100% satisfaction. Product Description MECHEER voltage meter, kilowatt meter, amp meter, kwh meter, current meter, electricity meter. The best choice for home appliance energy monitoring! Product Features Easy To Read 180° wide viewing angles: You can read the data from any angles.Blue Backlight: The backlight will light immediately when connecting to AC power, and automatically turn off after the backlight time expires if not press any buttons. You can press any buttons to wake up the backlight again.5 options of backlight time: bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on.Clear visible reading in day and night. Overload Protection Set the OVERLOAD power to 1800W before using.The LCD will flash "OVERLOAD" to warn the users when the power exceeds to 1800W. All the buttons will quit working and can only be workable when you lower or remove the load power.Prevent your appliances from being damaged. Data Hold Function Automatically save your consumption data when you remove the plug or appliances.Automatically save your consumption data when there was a power failure.Easy for reading and recording data. No data will be missed.Data Clear: You can press and hold the "function" button and "up" button at the same time to clear the KWH data, cost data and the cumulative time data. The electricity p rice and overload power data can only be cleared after resetting the meter plug. 7 Display Modes- Know more about the power consumption of your home electrical appliances ! Packing Content: US power meter plug x 1 User manual x 1 Get our power consumption meter to help you monitor and control the electricity usage. Save power energy and save money on bills. Specifications: Operating voltage: 120V ACFrequency Display: 60HzWide voltage range: 110V-130VOperating current: 15A MAXWattage display(watts): 0W-1800WCurrent display(amps): 0.0A-15.0APrice display range: 0.00COST/KWH-99.99COST/KWHTotal KWH and cost display: 0.000KWH-9999KWH, 0.00COST-9999COST WARNING！！！ 1. DO NOT use in wet environment. 2. DO NOT connect the power meter to a multi-plug outlet to measure multiple electrical appliances at the same time, in case the total power exceeds the threshold of 1800W and cause a short circuit. NOTICE: The consumption and time will NOT be measured and counted when: your device is in standby or not working;the rated power of your device is smaller than 0.5 watt, but energy consumption is always measured since the device was plugged in. What data will be saved? Electricity quantity, cost, electricity p rice, cumulative time. (But NOT save current, voltage, power, power factors)You can access to Mode 7 directly by pressing the button “COST”.Press any buttons to wake up the backlight after it automatically turns off (Backlight time is adjustable).If there is an abnormal display or no response, please reset the electric meter by pressing the RESET button. WHEN POWER SWITCHED OFF AND BACK ON, IF THE POWER METER TURNS "0", IT MAY BECAUSE THE TESTING TIME IS LESS THAN 1 HOUR, OR TOTAL KWH LESS THAN 0.1 KWH. THAT'S WHY NO DATA SAVED. The power of electrical appliances can not exceed 1800W.HOW TO RESET: If you only want to clear the cumulative data (Electricity quantity, cumulative cost, cumulative time) and keep the electricity p rice setting, just press button "FUNCTION" and "UP" at the same time over 3 seconds to quickly clear the data.If you want to reset all the settings, you can press the reset button with the reset tool. Don't use a needle because it may cause the button to get stuck in the device. HOW TO SET THE BACKLIGHT TIME: Press and hold "UP" and "DOWN" button at the same time to enter backlight time setting. Now "bL-0" is displayed on the LCD and flashes for 10 seconds.Press "UP" and "DOWN" to select the backlight time. (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on).Press the "COST" to save the backlight time settings.When you don't want the backlight on, press the "DOWN" button to turn off the backlight manually.You can also press any button to turn on the backlight again. Packing Quantity 1 PACK 16 PACK 1 PACK 1 PACK 3.27 inches x 6.61 inches x 3.15 inches. Weight: 7.8 oz Color White Size 1 Pack
Price: 15.46 USD
Location: Denver, Colorado
End Time: 2024-09-21T22:14:05.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: MECHEER
Marca: Does not apply
MPN: Does not apply
Color: White
Size: 1 Pack
Type: Does not apply
